Anti collapse system
Beams
Cable dispensing unit
Drawer units for pallets
Equipment rack
Fork entry bars / Beam divider / Beam divider
Beam divider - divides standing long items. Beam divider - divides flat decked goods. Frame protector
Load capacity notice
Mesh shelves
Pallet stop horizontal
Pallet stop vertical
Pallet support bars
Pallet support bars
Shelf panels
Sleeve footplate
Upright
Upright protector
Upright reinforce low 90/110
Upright reinforce high 90/110
|
Anti collapse system - fitted to rear side, to prevent goods from falling down behind the racks.
Barrier rails - with handrail for personal protection.
Beams - are stamped to show maximum loadbearing capacity per surface area.
Cable dispensing unit - with self-locking axle. Adjustable drum mounting and movable axle location.
Coil support
Collecting tub - for liquids.
Drawer units for pallets - achieves best ergonomics in handling. Fitted on beams or floor.Max load 700 kg
Drum supports
Equipment rack - for end-frame. Practical rack for assorted items.
Fork entry bars - for your flat decked goods.
Frame protector - for end frame, uprights and truck aisle. For both single and double racking. Height 400 mm.
Frame spacer - used in double racks.
Load capacity notice - indicates permitted loadings per section depending upon the placing of the bearing surface. For mouting in prominent position.
Mesh shelves - for picking goods with or without pallet, approved for premises with sprinkler system. Excellent protection against falling goods beside truck aisles. Width 910 mm.
Pallet stop horizontal - fitted to rear of frame to prevent pallets from being placed too far in.
Pallet stop vertical - prevent pallets from being placed to far in.
Pallet support bars - for half pallet. Makes possible storage of odd-sized pallets after rearranging intermediate beams.
Pallet support bars - for longside handling pallets.
Shelf panels - for picking goods without pallet. Width 455 mm.
Sleeve footplate - provides very good floor fixing and protects the lower end of the upright.
Upright - are stamped to show maximum load-bearing capacity per section.
Upright protector - for floor mounting height 400 mm.
Upright reinforce low 90/110 - to be fitted together with the sleeve footplate. Provides excillent protection for the upright frame member, without taking up extra space height 150 mm.
Upright reinforce high 90/110 - to be fitted with the sleeve footplate. Provides the best possible protection for the most exposed part of the frame height 760 mm.|
Stålgatan 2 SE 333 33 Smålandsstenar |
Phone: +46 371 340 00 Fax: +46 371 312 25 |
E-mail: info@eab.se Internet: www.eab.info |